Crest Flag

Curved crest flags on 117gsm knitted polyester, in four sizes, single or double-sided.

Description

PrintPassPrintPassSave 5% to 10% on this orderPrintPass members save 5% to 10% on every order, depending on plan.See plans
Artwork
Not ready yet? Order now and send it later. We give you a link after checkout.
Delivery
Calculated at checkout.
Custom orders
Need a bigger run, a custom size or a finish that isn't listed? Request a quote

Free artwork check by a real person Every order plants trees Delivered UK-wide

Every order plants treesThrough our Print A Tree project, at no cost to you
Checked by a real personWe look over your artwork before anything is printed

A curved flag that frames your design

The crest flag curves gently from top to bottom, so the outline frames your graphic rather than cutting across it. It comes in four sizes from 2560mm to 5140mm tall, facing right or left, or double-sided in the three smaller sizes. It is dye-sublimation printed on knitted polyester and flies from aluminium and GRP poles with black sleeves fitted as standard. Bases are ordered separately to suit the flag size and the ground. A real person checks your artwork before anything is printed.

Key details

Sizes

Small 2560mm, Medium 3150mm, Large 4080mm and Extra Large 5140mm tall

Fabric

Dye-sublimation printed on 117gsm knitted polyester with 80–90% show-through on the reverse — single-sided flags can also be ordered on AirMesh Polyester

Sides

Single-sided facing right or left in all four sizes, or double-sided in Small, Medium and Large — the double-sided flag has a blockout membrane between two printed layers, so each face reads correctly

Poles

Aluminium and GRP poles, with black flag sleeves fitted as standard — bases are sold separately

Turnaround

Made to order — if you are working to a date, tell us when you order and we'll confirm before we print

Best for

Storefronts, forecourts, event entrances and exhibitions, indoors or out

Artwork made easy

Every order includes a free artwork check by a real person — you don't need to ask. If we spot a problem, we'll contact you before anything gets printed.

Crest flags are set up on shaped templates, so use the one for your size and keep key elements inside the safe area. Supply a print-ready PDF with fonts outlined or embedded. As standard the front face has the pole and base on the left; if you want the pole on the right, flip the template shapes horizontally, not your design. Templates for all four sizes and a spec sheet are in the Templates section on this page.

Every order plants trees

The graphic is machine washable, so a crest flag can go back up season after season. Through our Print A Tree project with Ecologi, every Printlogik order funds verified reforestation — free, automatic, every time. See the forest grow →

No artwork? We'll design it for you.

Our studio can set up your file or create the design from scratch. Tell us what you need and we'll quote before you commit.

Get a design quote

FAQs – Crest Flag

How is a crest flag different from a blade or fin flag?

The shape. A crest flag curves gently from top to bottom. A blade flag has a straight upright edge, and a fin flag has a tall rounded top that curves back down to the pole. All three come in the same four sizes with the same fabric and side options.

What sizes are available?

Four: Small (2560mm tall), Medium (3150mm), Large (4080mm) and Extra Large (5140mm).

Is the flag printed on both sides?

A single-sided flag is printed on one face, and the knitted polyester gives 80–90% show-through, so the design reads mirrored and slightly fainter from the back. For a correct-reading image on both faces, choose double-sided.

Can I have it double-sided?

Yes, in Small, Medium and Large. A double-sided flag is two printed layers with a blockout membrane between them, stitched as one, so the design reads correctly from both sides. It is heavier, and bases are not covered by warranty when used with a double-sided flag, so ask us about the most secure fixing for your location. Extra Large and AirMesh flags are single-sided only.

Is a base included?

No. Bases are ordered separately so you can match one to the flag size and the ground it stands on. They are listed under Flag Accessories. Tell us where the flag is going and we'll recommend one.

Can crest flags be used outdoors, and how do I care for one?

Yes. Free-standing, they are suitable for winds up to Beaufort Scale 4 (13–18mph); dismantle in anything stronger. Machine wash at 30° with no detergent, dry completely before storing, and don't place poles too close together.

Can Printlogik design my crest flag?

Yes. If you don't have artwork, or yours needs tidying up, our studio can set up your file or create the design from scratch. Ask for a design quote and we'll price it before you commit.

More from Exhibition & Events

See the whole range
Fin FlagFin flags with a rounded top edge, in four sizes from 2560mm to 5140mm tall.Arch Event FlagPrinted fabric arch about 4m wide and 3.2m tall, with bases, ground spikes or neither.Wind Dancer FlagsA 5m tall portable outdoor flag on a telescopic pole, with a water or sand-fillable base.Flag AccessoriesBases, ground spikes, wall and floor mounts and carry bags for our flags.
  1. Navy crest flag for Oakridge Golf Club on a cross base against a plain studio backdrop
  1. Navy crest flag for Oakridge Golf Club on a cross base against a plain studio backdrop
  2. Navy crest flag for Oakridge Golf Club on the lawn beside a path leading up to the clubhouse
  3. Pair of navy crest flags for Oakridge Golf Club either side of a brick building's front steps
  4. Crest product image with background
  5. product with white hems

Templates

FileSizeDownload
Crest Flag Small Template15.5mb
Crest Flag Medium Template15.5mb
Crest Flag Large Template15.5mb
Crest Flag Extra-Large Template15.5mb
Spec-Sheet Crest Flag3.0mb